Solar Panel Cleaning Melbourne & Surrounds
Restore Your Lost Output.
Dirty solar panels on Melbourne's industrial rooftops lose 15–25% of their output. We clean them properly - pure water, soft brush, full harness - and restore what soiling has been costing you.
Melbourne's Industrial South Is Hard on Solar Panels
Port Phillip Bay's salt aerosol, combined with pollen in spring and construction dust year-round, creates a uniquely aggressive soiling environment in Melbourne's industrial precincts. Panels in Moorabbin, Laverton, and Port Melbourne typically soil faster than inland areas.
The fix is simple: clean panels, more output. A 200-panel factory roof at $8 per panel costs $1,600 to clean. If that restores 20% output on a 100kW system, the payback is measured in weeks, not months - and repeats every time you clean.
Panel warranty note: Most manufacturers (SunPower, LG, REC, Jinko) require cleaning with pure water only - no detergent, no pressure washing. Our process is fully compliant.
How We Clean
The right process matters - for output, for your warranty, and for the people on the roof.
Pure water only - no detergents
We use deionised and reverse-osmosis filtered water. Zero chemicals, zero streaks, and fully compliant with every major panel manufacturer's warranty requirements.
Soft-bristle brush heads
Boar-hair or soft goat-hair brush heads only - never abrasive. Your panel glass coating stays intact and your warranty stays valid.
Full fall-protection system
Full-body harness, energy-absorbing lanyard, and roof anchor points on every job. SWMS written per site. You get a safe operator, not a cowboy with a hose.
Electrically aware process
We work in the early morning (lower irradiance, lower DC current), never in wet or stormy conditions, and use non-conductive extension poles throughout.
Your Insurer and Site Manager Will Be Happy
Roof work is high risk. We take it seriously. Before we get on your roof, a site-specific Safe Work Method Statement is prepared, every anchor point is checked, and an exclusion zone is set up below. You get proof of compliance on request.
What you'll receive
Who We Work With
Factory owners, property managers, and building operators across Melbourne's industrial south.
Factory & Warehouse Owners
Industrial rooftops with large panel arrays. Often 50–500+ panels. Maximum ROI potential per clean.
Commercial Property Managers
Managing buildings where tenants or landlords have installed solar. Routine maintenance contracts available.
Office Buildings
Rooftop and carport solar arrays on 1–4 storey commercial buildings. Quarterly or bi-annual scheduling.
Solar System Owners
You had the system installed and want it maintained properly - not by someone with a garden hose and bad footwear.
We Cover Melbourne's Key Industrial & Commercial Precincts
Not sure if we cover your area? Call Justin on 0490 813 290 - we're flexible.
Get a Free Site Quote
Tell us about your site and Justin will be in touch within 1 business day. Free assessment for all new commercial solar jobs.
We provide residential solar panel cleaning across Melbourne's inner south-east, including Brighton, Hampton, Sandringham, Black Rock and Beaumaris in Bayside; Caulfield, Bentleigh, Carnegie, McKinnon and Elsternwick in Glen Eira; and Toorak, Malvern, Armadale, South Yarra and Glen Iris in Stonnington. For our full service area, see the service areas page.